Signs That You Need an Asphalt Repair

May it be parking lot, driveway for your residential or even commercial asphalt roads, people probably working hard to make property in good shape. One of the great options is making it into an asphalt pavement. This results in minimal maintenance and occasional repairs to make it stay safe, attractive, and usable over the years. That’s why people probably think about the importance of asphalt repair Seattle for pavement’s surface. However, how would you know if it’s the time to need a repair for asphalt’s pavement? 




Below are the signs that you need to call for an asphalt repair services: 

  1. Alligator Cracks 

These are the presence of shallow surface defects that span a large area of your pavement. These cracks are resembled with a web or an alligator skin. 

  1. Buckling and Warping 

This can be seen when you look at your pavement’s surface. This often appears when your asphalt is uneven and in wavy sections. Warped pavement can happen due to compromised base layer or due to a heavy vehicle. During these problems, asphalt and base need to be replaced or repaired. 

  1. Drainage Issues 

One of the worst threats to healthy pavements is the presence of lingering moisture for it can seep between layers and affect the asphalt’s binding agent. Once you notice puddles, address it immediately so areas with problems reduce it risks to cracks, potholes, and other possible damages. 

  1. Growing Cracks 

Sometimes, pavement cracks do not need an immediate repair. But, once crack is widening quickly or measures wider than ¼ inch, it is now the time for asphalt patching to fill the cracks from constant growing. 

  1. Chemical Spills 

Chemicals like automotive fluids and industrial solvent can affect asphalt’s binding agent. Once a chemical spill or stain is present, call a contractor immediately. These spills continue to sink into the pavement and may expand outward once the problems will not be addressed immediately. 

  1. Crumbing Edges 

Some driveways, parking lots, and roads are not protected on their edge with concrete gutters or curbs results in crumbling edges. Deteriorating edges can break the asphalt apart and leave debris. 

  1. Sinkage 

Asphalt pavement lies on crush stone and compacted base layer. This causes the base to erode. This can often be indicated through the presence of depositing water to your downspouts that can increase the impact on the pavement below. 

  1. Loose Gravel 

Loose gravel on pavement’s surface is a sign that asphalt has begun to break away some of its aggregate rock and binding agents. This is a strong sign that your asphalt surface needs to be seal coated immediately for pavement is susceptible to cracks and future damages. 


Asphalt pavements should always be in good condition. Two of these reasons are to maintains its visual aesthetics and prevent premises liability like accidents. Keeping it in good condition can make a lot of good impression to its physical appearance. While the other one is to prevent the manager or owner from being liable to hazards and injuries. All asphalt pavements are subject to repair and maintenance so it can increase its longevity and benefits in the long run. 

Submit a Comment

Your email address will not be published. Required fields are marked *